Crownhill Associates Limited
EM203 + RJ203 02 Module Combination

EM203 + RJ203 02 Module Combination

£36.50
(Exc. 20% VAT)
(£43.80 Inc. VAT)
In stock
–
+
Model
01794

Hardware

Specifications:

10/100Base-T auto-MDIX Ethernet port (mates with the RJ203).
Optional Wi-Fi interface (requires the GA1000 add-on module).
Four high-speed serial ports (CMOS) packed into 8 I/O lines:
Baudrates of up to 921,600bps;
None/even/odd/mark/space parity modes;
7 or 8 bits/character;
Full-duplex mode with RTS/CTS and XON/XOFF flow control;
Half-duplex mode with direction control.
Flexible mapping with 15 different options, such as:
A single channel: RX, TX, CTS, RTS, DSR, and DTR lines;
3.5 channels: RX, TX, RX2, TX2, RX3, TX3, and RX4 lines;
13 additional arrangements.
Based on the high-performance T1000 IC.
Four LEDs:
Green and red main status LEDs;
Yellow Ethernet link LED;
Green 100Mb LED.
Two control lines for driving two additional external status LEDs.
Reliable power-on/brown-out reset circuit.
Power: 230mA @ 3.3V (100Base-T mode, PLL on).
Dimensions (LxWxH): 33.4x18.1x4.2mm.
Dimensions with RJ203 (LxWxH): 34.4x20.0x15.5mm.
Operating temperature range: -20 ~ +70C.
Firmware is upgradeable through the serial port or network.
CE- and FCC-certified.

Connector pins of the EM203 are designed to mate with interface pads of the RJ203. The EM203 module itself fits "under" the RJ203 and partially within the recess area provided by the RJ203. This recess area is formed by a translucent housing of the RJ203. When the EM203 is combined with the RJ203, the status LEDs of the EM203 become positioned close to the translucent front wall of the RJ203As and remain visible through the front face of the RJ203.