Shop by Brand

PCB Supplies

Serving Professional, Hobby and Educational users, with Information, Tools and Raw materials for the manufacture of Printed Circuit Boards. We hold stock of all our our products including Drill Bits, Routers, FR4 Materials, Underlay Materials and much more.
 

With an emphasis on High Quality at affordable prices, we want to be your One Stop Shop..... Purchasing these specialist products should be hassle free.

Our stock is immediately available , everything we offer is used by us. This site allows us to offer some of the specialist tools and solutions that commercial manufacturers use, directly to you. Enabling you to benefit from the same high specification processes that we utilise to produce professional quality printed circuit boards in low volumes at low cost.

 

 

  
Top Sellers
Router 0.50mm x 2.5mm

Router 0.50mm x 2.5mm£4.50

0.50mm x 2.5mm SC/FT Series PCB Router, suitable for peripheral contour routing

1.0 mm 1/2 oz double sided FR4 12'' x 9''

1.0 mm 1/2 oz double sided FR4 12" x 9"£4.50

9" x 12" 1.0 mm 1/2 oz double sided FR4 Copper Board typically used in the manufacture of double sided PCB's with Plated Through Holes or Via's.

1.55mm 1oz single side FR4  12'' x 9''

1.55mm 1oz single side FR4 12" x 9"£4.50

FR4 copper clad single side FR4 board, cut to 12"x9"

End Mill 0.10mm

End Mill 0.10mm£15.25

0.10mm End Mill, used to mill large paths in the FR4 board material.

PCB Drill 0.70mm x 10.00mm

PCB Drill 0.70mm x 10.00mm£1.95

0.70mm x 10.00mm ST Series PCB Drill, are a universal drill bit witch can be used for many materials.

PCB Drill 0.80mm x 10.00mm

PCB Drill 0.80mm x 10.00mm£1.95

0.80mm x 10.00mm ST Series PCB Drill, are a universal drill bit witch can be used for many materials.

PCB Drill 0.90mm x 10.00mm

PCB Drill 0.90mm x 10.00mm£1.95

0.90mm x 10.00mm ST Series PCB Drill, are a universal drill bit witch can be used for many materials.

1.55mm 1 oz single sided FR4  12'' x 9'' (pack of 10)

1.55mm 1 oz single sided FR4 12" x 9" (pack of 10)£40.50

PACK OF TEN 9" x 12" 1.55mm 1/2 oz single sided FR4 Copper Board typically used in the manufacture of double sided PCB's with Plated Through Holes or Via's.
End Mill 0.15mm

End Mill 0.15mm£15.25

0.15mm End Mill, used to mill large paths in the FR4 board material.