Pure Aluminium Drill Entry Board, 0.2 mm 12inch by 9inch (pack of 10)

Zoom

Our Price: £4.50(Exc. 20% VAT)(£5.40 Inc. VAT)

Part Number: 02955

Availability:

In stock, immediate despatch

An important drilling consumable is the underlay or backing material. The purpose of the backing material is to prevent exit copper burrs on the underside of the drilled boards and to provide adequate space for drill stroke termination. An acceptable backup material does not contaminate the hole and helps cool the drill bit, thereby improving hole quality.

Aluminium underlay material is a thin sheet of aluminum. It contain no abrasives that could increase drill wear or contaminates that could be evacuated through the drilled hole. The surface is smooth and hard to properly suppress exit burrs, and bird nesting.

The main purpose of the entry material is to prevent drill breakage by centering the drill bit. In addition, the entry material helps avoid copper burrs, reduce contamination in the hole and on the drill bit, and prevent pressure foot marks from the drilling machine.

Although aluminum composites are typically the most expensive, they do a tremendous job improving accuracy and dissipating heat. In addition, they leave no hole contamination. Solid aluminum provides good burr suppression and no contamination, with only a slight increase in the risk of drill bit breakage for very small diameter drill bits.

Customers who bought this item also bought:

Phenolic Drill Exit Board 1.6mm, 12inch by 9inch 10 sheets
£8.00

12inch by 9inch Multilayer Prepreg (pack of 10)
£5.60