Shop by Brand

Micro Drill 0.10mm x 1.8mm

Micro Drill 0.10mm x 1.8mm
Our Price:  £45.20(Exc. 20% VAT)(£54.24 Inc. VAT)

Part Number:  02119



No stock

Pack of Ten

Printed circuit boards are usually made of fiberglass (FR4), which is highly abrasive and given the many hundreds or thousands of holes on modern circuit boards, requires the use of specialist drill bits. PCB Supplies, supply the highest of quality Drill Bits manufactured by Union Tools. These Drill Bits are made of top quality Tungsten Carbide.

This is a MV Series Mirco Drill. The MV Series are ideal for through holes and blind via hole drilling. These drills are made of hyper fine grade carbide alloy to ensure they are robust. STX series have elongated flutes in comparison to the equivalent standard version in the same diameter.

The mill bits are perfect for milling FR-4 circuit board materials. The mill element is fabricated of solid carbide since carbide is the preferred material for milling glass epoxy circuit board laminates due to its exceptional hardness. The mill life is dependent on a number of factors including feed rate, speed, material characteristics, and what the user considers acceptable mill quality. Due to the brittleness of carbide these mill bits are recommended for use with precision equipment. Care must be taken not to drop or flex them as breakage may occur.


  • Common 3.15mm 1/8" shanks
  • Solid carbide mill element
  • Designed for high speed equipment operating up to 80,000 RPM
  • Can be used at lower speeds by using a slower feed rate

Depth Setting Rings
We recommend that bits are fitted with depth setting rings. This will allow you to set the plunge depth stop on your drill press to a single value that will work for all bit diameters.
All of our bits can be purchased with or without rings. When ordering drills with depth rings, you may specify the depth ring position to suit your requirements.




0.30/0.35 7.0
0.40 ~ 0.55 7.0/8.5
0.60/0.65 8.5
0.7 ~ 3.10  

Please note: We only sell Micro Drills in packs of ten.