PCB Drill 2.00mm x 10.00mm

Zoom

Our Price: £1.95(Exc. 20% VAT)(£2.34 Inc. VAT)

Part Number: 01888

Availability:

In stock

Printed circuit boards are usually made of fiberglass (FR4), which is highly abrasive and given the many hundreds or thousands of holes on modern circuit boards, requires the use of specialist drill bits. PCB Supplies, supply the highest of quality Drill Bits manufactured by Union Tools. These Drill Bits are made of top quality Tungsten Carbide.

This is a UC Series Drill bit. The UC Series bits are and undercut bit which is used for small through holes or via interconnectors, they allow improved inner hole wall quality, whilst maintaining good registration accuracy. This makes them ideal for high density multilayer boards.

The mill bits are perfect for milling FR-4 circuit board materials. The mill element is fabricated of solid carbide since carbide is the preferred material for milling glass epoxy circuit board laminates due to its exceptional hardness. The mill life is dependent on a number of factors including feed rate, speed, material characteristics, and what the user considers acceptable mill quality. Due to the brittleness of carbide these mill bits are recommended for use with precision equipment. Care must be taken not to drop or flex them as breakage may occur.

Features:

Common 3.15mm 1/8" shanks
Solid carbide mill element
Designed for high speed equipment operating up to 80,000 RPM
Can be used at lower speeds by using a slower feed rate

Depth Setting Rings

We recommend that bits are fitted with depth setting rings. This will allow you to set the plunge depth stop on your drill press to a single value that will work for all bit diameters.

All of our bits can be purchased with or without rings. When ordering drills with depth rings, you may specify the depth ring position to suit your requirements.