|
|
Latest Products EM500 BASIC-programmable Ethernet Module£20.00 ex. VAT £23.50 inc. VAT - Volume pricing from as little as £16.50 each The EM500 is a miniature stand-alone BASIC-programmable embedded module, designed to be used in combination with a standard LED/magnetics RJ45 jack. The combined footprint of the EM500 and a standard jack is only 28.5x18.5mm.  FEZ LCD & Keypad Shield£25.99 ex. VAT £30.54 inc. VAT This 2x16 character LCD and button shield plugs directly in FEZ Domino. This board uses pins Di4 to Di9 for LCD and An0 for buttons. We've enhanced this board to version 2.0 (red board). Please use the appropriate drivers below.  PCB End Mill 0.10mm with ring£14.25 ex. VAT £16.74 inc. VAT - Volume pricing from as little as £11.40 each 100% Carbide endmill for copper removal by providing straight-sided and flat-bottomed isolation paths with minimal penetration into the substrate. Recommended for insulation milling of RF and Microwave circuitry. Endmills include distance rings for systems with automatic tool change. Used for rub out paths. Distance Ring included. PCB End Mill 0.15mm with ring£13.21 ex. VAT £15.52 inc. VAT - Volume pricing from as little as £10.60 each 100% Carbide endmill for copper removal by providing straight-sided and flat-bottomed isolation paths with minimal penetration into the substrate. Recommended for insulation milling of RF and Microwave circuitry. Endmills include distance rings for systems with automatic tool change. Used for rub out paths. Distance Ring included. PCB End Mill 0.254mm with ring£11.45 ex. VAT £13.45 inc. VAT - Volume pricing from as little as £9.16 each 100% Carbide endmill for copper removal by providing straight-sided and flat-bottomed isolation paths with minimal penetration into the substrate. Recommended for insulation milling of RF and Microwave circuitry. Endmills include distance rings for systems with automatic tool change. Used for rub out paths. Distance Ring included.  PCB End Mill 0.50mm with ring£7.00 ex. VAT £8.22 inc. VAT - Volume pricing from as little as £5.60 each 100% Carbide endmill for copper removal by providing straight-sided and flat-bottomed isolation paths with minimal penetration into the substrate. Recommended for insulation milling of RF and Microwave circuitry. Endmills include distance rings for systems with automatic tool change. Used for rub out paths. Distance Ring included. PCB End Mill 0.80mm with ring£7.00 ex. VAT £8.22 inc. VAT - Volume pricing from as little as £5.60 each 100% Carbide endmill for copper removal by providing straight-sided and flat-bottomed isolation paths with minimal penetration into the substrate. Recommended for insulation milling of RF and Microwave circuitry. Endmills include distance rings for systems with automatic tool change. Used for rub out paths. Distance Ring included.  PCB End Mill 2.00mm with ring£7.00 ex. VAT £8.22 inc. VAT - Volume pricing from as little as £5.60 each 100% Carbide endmill for copper removal by providing straight-sided and flat-bottomed isolation paths with minimal penetration into the substrate. Recommended for insulation milling of RF and Microwave circuitry. Endmills include distance rings for systems with automatic tool change. Used for rub out paths. Distance Ring included.  uALFAT-TF£24.70 ex. VAT £29.02 inc. VAT - Volume pricing from as little as £22.94 each While Stocks Last! uALFAT OEM Board with TransFlash Micro SD Connector. uALFAT Chip£15.99 ex. VAT £18.79 inc. VAT - Volume pricing from as little as £11.85 each Package: LQFP 48 uALFAT, pronounced micro-ALFAT, is the latest file system chip from GHI Electronics. Now you can read and write FAT file system files at a very low cost. uALFAT can read files from SD/MMC cards or from USB memory.  FEZ Mini Robot Kit£117.95 ex. VAT £138.59 inc. VAT This robot kit comes with everything you need to make an autonomous robot. With the included reflection sensors, you can program it to move on a table without falling, follow a certain path and more. You can expand this robot by adding one of the many available plug-n-play sensors.  FEZ Micro SD Card Expansion£15.95 ex. VAT £18.74 inc. VAT This expansion allows you to add micro SD storage to your project. Included is the right angle pin header.  FEZ Mini Starter Kit£78.95 ex. VAT £92.77 inc. VAT Want to learn how to program processors using .NET Micro Framework? This is the kit for you! It includes 6 sensors but many more plug-n-play sensors can be purchased separately.  FEZ Domino Starter Kit£78.95 ex. VAT £92.77 inc. VAT Jump start your NETMF projects with our premier FEZ Domino Starter Kit. This kit includes FEZ Domino, a component shield, red and green LEDs and a button.  FEZ Component Shield£25.37 ex. VAT £29.81 inc. VAT This shield provides an array of simple connections for our growing list of components. |
Your shopping basket is empty
|
